Description
Heavy-Metal Safety Baseline • 450mAh Dual-Discharge • 1+1+2 Strain Switching
Sampson COMBO-BOX Dual-Chamber Disposable Vape (2.0ml)
Engineered for dual-extract pairing (Indica / Sativa / Hybrid). Features two hermetically isolated 1.0ml reservoirs, twin 1.6Ω low-temp ceramic cores, heavy-metal safety construction, and a 450mAh pure cobalt cell with factory pre-shipping screening.
Heavy-Metal Safe
Third-Party Lab Ready
Eliminate Dual-Coil Voltage Sag, Flavor Migration, and Regulatory Screening Failures
Dual-chamber devices allow extractors to double their SKU appeal in a single hardware shell. However, generic dual-flavor disposables frequently suffer from catastrophic electrical and structural defects. Standard 250–280mAh battery cells cannot handle simultaneous dual-coil discharge, resulting in abrupt voltage sag, weak cloud volume, and prematurely dead batteries before the oil is fully consumed. In addition, poorly sealed chamber dividers cause cross-tank oil leakage, destroying the purity of single-strain terpene profiles.
The Sampson COMBO-BOX addresses these manufacturing flaws through precise mechanical engineering. Driven by an upgraded 450mAh Grade-A pure cobalt rechargeable cell, it delivers stable current even when powering both coils simultaneously in blend mode. Built around a strict heavy-metal safety design baseline, the device utilizes medical-grade PCTG tanks, clean internal air pathways, and inert porous ceramic elements to ensure product safety. Sampson fully cooperates with clients to submit hardware for accredited third-party laboratory testing according to your specific state and regional regulatory standards.
450mAh High-Drain Power
Pure cobalt chemistry maintains steady wattage output during simultaneous dual-coil activation. Type-C fast charging guarantees total evacuation of both reservoirs.
1+1+2 Three-Way Selector
Reliable mechanical switch allows end-users to select Chamber A solo, Chamber B solo, or fire both elements concurrently for a rich hybrid blend.
Hermetic Chamber Isolation
Two completely separated 1.0ml medical PCTG chambers prevent oil migration and preserve strain integrity without terpene cross-contamination.
Engineering Specifications & Technical Benchmarking
Compare the engineering specifications of the Sampson COMBO-BOX high-drain platform against common market hardware:
| Parameter / Engineering Metric | Sampson COMBO-BOX Platform | Standard Generic Hardware |
|---|---|---|
| Battery Cell & Capacity | 450mAh High-Drain Pure Cobalt | 250–280mAh Ternary Cell (Severe voltage drop) |
| Flavor Switching Logic | 1+1+2 Mode: Flavor A / Flavor B / Mix (A+B) | Single toggle (No concurrent blend mode) |
| Chamber Architecture | Hermetically Isolated 1.0ml × 2 (2.0ml Total) | Improperly sealed divider (Cross-bleeding risk) |
| Heating Elements & Coils | Twin 1.6Ω (±0.1Ω) Low-Temp Ceramic Cores | High-resistance wire or scorched ceramic |
| Heavy-Metal Safety Design | Strict baseline standard; clean vapor path & food-grade PCTG | Unscreened alloys; risk of heavy metal migration |
| Third-Party Lab Verification | Full factory support to submit samples for client testing | Opaque sourcing without third-party lab support |
| Form Factor & Dimensions | 38 × 78 × 17 mm (Compact Ergonomic Palm Box) | Bulky profile (> 115mm length) |
| Recharging Interface | Bottom Type-C Fast Rechargeable Port | Micro-USB or non-rechargeable |
| Defect Rate Benchmark | Factory pre-shipping QA aimed at < 0.3% | 3.0% – 6.0% Industry average |
4-Stage Manufacturing Verification & Compliance Protocol
Because concurrent dual-coil firing places substantial load on internal circuitry and battery cells, every production run of COMBO-BOX undergoes structured verification at our manufacturing facility. Review our full testing procedures at
Quality Testing Protocols.
Dual-Discharge Cell Audit
450mAh pure cobalt cells are tested under simulated concurrent load to verify voltage curve stability and prevent battery thermal sag in blend mode.
Chamber Hermetic Test
Both 1.0ml PCTG reservoirs undergo pressure differential verification to ensure airtight separation and eliminate cross-contamination during transit and storage.
Heavy-Metal Safety Baseline
Constructed with food-grade materials and lead-free engineering. We proactively assist and coordinate sending production samples to accredited third-party labs on demand.
Twin 1.6Ω Coil Calibration
Automated resistance screening checks that both ceramic heating elements stay strictly within 1.6Ω ± 0.1Ω, ensuring balanced heating performance.
Turnkey OEM Customization & Express Factory Logistics
Sampson provides multi-state operators, extraction laboratories, and private-label vape brands with direct factory engineering support:
- Rapid Hardware Samples: Unbranded COMBO-BOX evaluation units dispatch within 24–48 hours via DHL, FedEx, or UPS Priority Air.
- Private Label Customization: Customize the COMBO-BOX with custom Pantone body shells, soft-touch rubberized finishes, metallic accents, and silk-screened strain icons. Learn more about our
OEM/ODM Customization Services. - Full Product Architecture: Explore our wider dual-tank series in
Dual-Chamber AIO Disposables. - Tailored Retail Packaging: Pair your hardware with compliant child-resistant master cartons and dual-flavor presentation packaging via
Custom Packaging Solutions.
Scale Your Extract Brand with High-Power Dual-Flavor Hardware
Eliminate dual-coil voltage sag and ensure reliable vapor performance across both strains. Contact our engineering and sales desk directly for wholesale tiered pricing, filling machine jigs, and evaluation sample packs.
Email: sales@sampsoncarts.com • Shenzhen Sampson Technology Co., Ltd. Baoan, Shenzhen, China